เพศ (สถานะภาพ)
ชาย (สมรส)

สัญชาติ
ไทย

ศาสนา
พุทธ

วันเกิด (อายุ)
23-กุมภาพันธ์-2537    อายุ 29ปี

ส่วนสูง/น้ำหนัก
166 Cm    หนัก 55 Kg

สถานะภาพทางทหาร
ผ่านการเกณฑ์ทหาร

จังหวัด (เขต)
สงขลา (ระโนด)

การติดต่อที่สะดวก
โทรศัพท์ , Email , ไลน์ไอดี

สาขาวิชาชีพ
วิศวกรรมอุตสาหการ/เครื่องกล/โรงงาน

ลักษณะงานที่ต้องการ
งานประจำ (Full Time)

ระดับเงินเดือนที่ต้องการ
30,000บาท ขึ้นไป

แก้ไขข้อมูลล่าสุด
9 ส.ค. 2566

เข้าระบบครั้งสุดท้าย
9 ก.ย. 2566

การศึกษา จบการศึกษาแล้ว ในปี พศ. 2559

ประสบการณ์ทำงานทั้งหมด 6 ปี

พิมพ์ดีด
ไทย 40 คำ/นาที    อังกฤษ 30 คำ/นาที

ความสามารถการขับขี่
รถยนต์ ,

ยานพาหนะส่วนตัว
รถจักรยานยนต์ ,

โครงการ/ผลงาน
Company : Experteam Co., Ltd.
Position : QA/QC Engineer
Responsibility : 1. Take the customer's test. or new design according to customer's
requirements to order materials and prepare drawings for construction
Take the customer's test. or new design according to customer's
requirements to order materials and prepare drawings for construction
2. Check the quality of project work to meet the standards
and customer needs Check the quality of project work to meet the standards
and customer needs.
3. Prepare WPS, PQR, WQT documents according to the standard.
Prepare WPS, PQR, WQT documents in accordance with the standards.
4. Solve problems in the production process. fix the wrong job
Solve problems in the production process. fix the wrong job
5. Check and measure the results compared to the production plan.
Check and measure the results compared to the production plan.
6. Check potential hazards.
7. Check and review the work according to the requirements.
Check and review the work according to the requirements.
8. Review NDT Report & Inspection Report.
9. Written Quality Control Process.
10. Inspection Report ,Control Quality of Project , Contact with Third Party .
11. Verify Code and Standard Clearly Drawing.
12. Participate in the assessment of safety risks or hazards in working
with the Civil Service Commission.
Participate in assessing the risks or hazards of safety in working
with the professional.
13. Follow the Occupational Safety, Health and Work Environment Manual.
Follow the Occupational Safety, Health and Work Environment Manual.
14. Root Cause Analysis for Incident Investigion
15. Other tasks assigned by the supervisor
16. Inspection of grid blasting surface profile and painting shall be blast-cleaned
according to the grade of cleanliness and the surface profile.
17. Check WFT and DFT of each coat
18. Close out Dossier after job fabrication complete for submit owner.
Company MUBADALA PETROLEUM (THAILAND) LIMITED
- MPB5 - Jasmine Bundle Mar 2022
- JM259-Well Hook-Up (WPDd-3 x Well)
- JM238 (Onshore fabrication for blanket gas and VSD implementation)
- JM260 Modify Spool for Flow Meter
- "JM237 Install Silencer /pipe spool/support
Gen-A, B, C"
Position : QC Inspector (Offshore)
Period : 16 March 2022 - Present
Responsibility : 1. Take the customer's test. or new design according to customer's
requirements to order materials and prepare drawings for construction
Take the customer's test. or new design according to customer's
requirements to order materials and prepare drawings for construction
2. Check the quality of project work to meet the standards
and customer needs Check the quality of project work to meet the standards
and customer needs.
3. Prepare WPS, PQR, WQT documents according to the standard.
Prepare WPS, PQR, WQT documents in accordance with the standards.
4. Solve problems in the production process. fix the wrong job
Solve problems in the production process. fix the wrong job
5. Check and measure the results compared to the production plan.
Check and measure the results compared to the production plan.
6. Check potential hazards.
7. Check and review the work according to the requirements.
Check and review the work according to the requirements.
8. Review NDT Report & Inspection Report.
9. Written Quality Control Process.
10. Inspection Report ,Control Quality of Project , Contact with Third Party .
11. Verify Code and Standard Clearly Drawing.
12. Inspection of grid blasting surface profile and painting shall be blast-cleaned
according to the grade of cleanliness and the surface profile.
13. Planning / organizing and checking of work progress & schedules to meet
the deadlines
14. Check WFT and DFT of each coat
15. Close out document after job fabrication complete for submit owner.