ตำแหน่ง QA/QC assistant manager

บริษัท Daidong Electronics (Thailand) Co.,Ltd.

ที่อยู่บริษัท 63/2 หมู่ที่ 5 ตำบล บ้านบึง อำเภอบ้านบึง ชลบุรี 20170

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1. Replied and checked all 8D reports before sending to QA/QC manager and sending e-mail to customer.
2. Follow up and control the balance of the replacement part' s quantity/ Debit note/ Credit note and also make the improvement plan/ action.
3. Made the QA/QC daily/ weekly/ monthly report for the internal management meeting/ customer.
4. Be a company representative for go to meetings with customers both in the country and abroad on quality-related topics such as
the introduction of new model or going to meetings about quality problems, etc.
5. Meeting and thinking with QA/QC manager/ QA/QC GM about making the QA/QC improvement project such as the enhancing inspector skills, etc.
6. Preparation of the limit sample and books to be requested to the customer on each issue.
7. Auditor and Auditee with IATF 16949:2016 and ISO 14001
PPAP Supervisor (Jan 2018 - Jun 2018)
1. Prepared and checked Customer' s PPAP documents (Sony & Panasonic).

ตำแหน่ง QA/QC Manager

บริษัท Mawin Plastics Co.,Ltd.

ที่อยู่บริษัท 63/88 หมู่ 2 ซ.อรุณ ถ.เลียบคลองสี่วาพาสวัสดิ์ ต.นาดี เมืองสมุทรสาคร สมุทรสาคร 74000

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1. Reviewed & revised " QP " ( Quality Procedure ) about " Control of Nonconforming Product ".
2. Reviewed & revised " WI " all of products that still had the manufacturing and made new " WI " for new products.
3. Set up " QA Final Appearance Check " standard by using " AQL Standard " (MIL-STD-105E).
4. Followed " Claim Sheet " both internal & external must didn' t be answered over due date & its solutions must could to correct and to prevent recurrence of claim problems.
5. Made center database of " Manufacturing Data Details " for preparing to implement about " ERP System ".
6. Contacted with customers about the new products experiment & for reviewing about " Quality Standard ".
7. Observer in " GMP External Audit " annual.
8. Summarized data " QA Daily Report " to help for the specification monitoring.
9. Tested new products for bringing datas such as tolerance value, test condition to input in " COA Form " (Certificate of Analysis Form).
10. Prepared documents to register with " Food and Drug Administration " about the medical device manufacturing.
11. Made all activities that could improve " Quality Performance " both of " Product " & " Process ".

ตำแหน่ง Business Development Manager & Service Manager

บริษัท General Medical Care Co.,Ltd.

ที่อยู่บริษัท Head office ลาดพร้าว ซอย 15

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1. Controlled " Human Resource Department ", " Officer Department ", " Accounting Department " and " Customer Service Department ".
2. Prepared documents to register with " Food and Drug Administration " about import new medical products and new hemodialysis machines.
3. Coordinated with the shipping company and the manufacturer company about import new medical products and new hemodialysis machines.
4. Reviewed preventive maintenance checklist standard both of " RO Water System " and " Hemodialysis machines " then made improvement.
5. Set new standard for the collection of " RO water sample " to lab each durations were every month, every 3 months and every year.
6. Made minimum stock for the spare part both of " RO Water System " and " Hemodialysis machines " that had often waste.
7. Ordered the spare part both of " RO Water System " and " Hemodialysis machines ".
8. Made a quotation for the service job both of " RO Water System " and " Hemodialysis machines ".
9. Coordinated and communicated with the chinese engineer about troubleshooting of hemodialysis machine' s problems.
10. Others and every jobs that made a company had the business development.

ประสบการณ์ทำงานอื่นๆ
● Songserm Cooltech Industry Co.,Ltd. : QC Assistant Manager (Jul 2016 - Oct 2016)
1. Made QP ( Quality Procedure ) and Standard ISO 9001 : 2015 for QC all sections.
2. Set up " QC Incoming & QC Final Check " standard by using " AQL Standard " (MIL-STD-105E).
3. Made limit samples for support checking & decision about products quality.
4. Summarized data " QC Monthly Reports " all months.
5. Improved process checking of QC all sections for better present and set up " Calibration System ".
6. Made " Measurement Jigs " to support process of production section for improve productivity and quality of product.
7. Followed " NCR and CAR Sheets " to prevent recurrence of claim problems.
● Endo Thai Co.,Ltd. : QA Leader & QIC Leader Gate 3 (Oct 2004 - Dec 2015)
1. Controlled " Calibration System " and " QA Final " section.
2. Controlled and followed " Calibration Master Plan " must to on due date each sections, controlled calibration and
repairing measurement equipments for production sections daily and measured setting data " HV " for
" Heat Blade Machine " ( Koshuha Machine ).
3. Controlled " QA Final System " both " Spec " and " Appearance " inspections ( AQL Standard ) and compiled data ( Spec )
with checked for email to QA Supervisor.
4. Compiled datas of production sections that customer requested for made report for email to customer.
5. Followed " Claim Sheets " both " Internal Claims " and " External Claims " must answered not over due date and analyzed
corrective @ preventive actions both of production and qc section were good enough to prevent recurrence of claim
problems by using " 4M Check " and " 5 Why " principles.
6. Auditor and Auditee with ISO 9001:2008 and ISO 14001:2004
7. Made " Neck Length JIG " and went to setting " New Model " with operators of raw materials factory at Chachoengsao
Province.
8. Prepared MS Power Point and was lecturer for training production and qc operators every 6 months about QA/QC system
( OJT ).
9. Lecturer for training " Sub Leaders " and " Leaders " of factory about cost down technic by using " MUDA MURI MURA ".
10. Planned cost down and productivity improving project at " Calibration " and " QA Final " section. ( KAIZEN )
11. Last position was " QIC LEADER Gate 3 " ( QIC = Quality Improvement Control ) that it' s job descriptions were following
claim sheets both internal and external claims, patroled process of Gate 3 dialy about working standards such as
"Q-Point", "WI", "SI", "Check Sheet" etc. finally made MS Power Point for present with Japan and Thai manager and MD.
● MMC Tools Thailand Co.,Ltd. : Production Engineer and QC Engineer (Oct 2003 - Oct 2004)
1. Controlled delivery for shipment each day ( Shipment all days ).
2. Basic for maintenanced and checked M/C if M/C trouble or not good condition before request Maintenance Section later.
3. Put the system of 5S Policy, PDCA, 4M and Target each section. ( 3.1 M/C cleaned and had fully equipments. 3.2 Up skill
operators all sections. )
4. 4M checked for improvement and increase total productivity.
5. Controlled NG works must not have shipment to customer and reduced quantity of claimed work from customer.

สถาบัน The Quality Center (Thailand) Co.,Ltd.

หลักสูตร IATF 16949:2016 Automotive Core Tools Technique (APQP & Control plan, PPAP, FMEA, MSA, SPC & Process

สถาบัน Sony Technology (Thailand) Co.,Ltd.

หลักสูตร Basic Visual Surface Inspection Training

สถาบัน BSI, Intertek, SGS, สถาบันเพิ่มผลผลิตแห่งชาติ

หลักสูตร Automotive Management System ( IATF 16949:2016 ) : Requirement, IA, FMEA, SPC, MSA, APQP, PPAP, 8D & Why-Why Analysis