ตำแหน่ง Production Manager

บริษัท Pandora Production

ที่อยู่บริษัท Praves, Bangkok

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Monitored and controlled end-to-end process executed to achieve 100% as per target set.
 Incorporated with planning, and executed the fortnight production plan as per capacity and resource to reach on-plan target set.
 Led and brainstormed among managers the shortfalls; productivity, time and variance to improve and optimize head count to adapt and adjust the production order plan.
 Increased 50% improvement for enamel process; 20% for assembly process and 15% for plating process respectively.
 Initiated, adapted and provided coaching, guideline and people development to the different style of people; supervisors, group leaders, senior engineers, and engineers, as result, they developed and grew up in their career path.

ตำแหน่ง Senior Production Engineer

บริษัท Pandora Production

ที่อยู่บริษัท Praves, Bangkok

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Observed, analyzed and developed the production process by eliminating unnecessary steps such as grinding, polishing, soldering, cleaning and plating process, as the result improved the number of output with quality standard maintained.
 Gained the product yield by reducing scratch, unclean defect for polishing, cleaning and plating process from 50% to 70%, 70% to 75-80% and 80 to 85-90% Optimized polishing and cleaning process by adjusting solution concentration and change brush types.
 Tightened work loop, coordinated with PD, R&D, QC to monitor daily work tasks for the new production for the best practices and reached the design.  Coordinated with PD, R&D and QC to monitor work tasks and process adjusted based on capacity for the new product in order to plan the big lot of production under the high quality and exacted to the sample.
 Coordinated with QC and QA to monitor work tasks and process adjusted based on capacity for the current products in order to get best practices to adjust, adapt and reach the high quality.

ตำแหน่ง Senior Project and Product Development Engineer

บริษัท Star Microelectronics (Thailand) co.,Ltd

ที่อยู่บริษัท Pranakorn Si-Ayutthaya

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Electronics manufacturing service (EMS) to original equipment manufacturing (OEM) and assembly for printed circuit board (PCB) for hard disk drive control boards.
 Designed new product to meet customer’s specification and requirements.
 Designed new process to minimize complicated and unnecessary process to increase productivity within production line.
 Created BOM, set up all of specification control (data sheet, assembly spec.etc.) for new product and implemented them.
 Observed, analyzed and designed in applying Designed to selected current material or tooling which lower cost.
 Negotiated with suppliers about specification and cost of new materials or tooling to get the best performance and yield.

ประสบการณ์ทำงานอื่นๆ
BETAGRO GROUP 2011-2012 Betagro group comprises animal facility, poultry and swine farming, feed mill and hatchery Business Solution Officer
■ Business Process Re-design Project (BPR) 2011-2012
 Incorporate with concerned departments to analyze step of working and processing to reduce working time, process improvement, product yield and increase productivity at each factory.
 Collected data, analyzed and created action plan and monitored it closely.
 Cooperated with IT department to implement system, applications and programs to support all of process improvement project.
■ Business Innovative Risk Management Project (BIR)
 Introduced and led concerned departments to make a flow chart of process in working unit, risk mapping and risk control matrix.
■ Business Continuities Management Project (BCM)
 Led the production teams at all factories to analyze and create plan for business continuities in case of irregularity such as fire fighting, natural disaster such as flooding. Built awareness of important product analysis, damage cost, preparation cost, re-installation and recovery cost.
 Presented all projects to director and senior vice president.

AGC ELECTRONICS (THAILAND) CO.,LTD. 2009-2011 ACG Electronics is manufacturing of grass substrate for HDD product of Asahi grass group in Japan. Production Engineer 2009-2011
 Ensured the production met customer target under quality and committed timeline. Applied SPC to monitor and control process for better operating of polishing process.  Reviewed supervisor’s production report and analyzed processing problems of polishing process.
 Improved product quality by optimizing the polishing solution concentrate and time consumed.
 10% improved productivity after applying machine balancing program.
 Achieved cost reduction by applying the recycle polishing solution.
 Emphasized the supervisors and team leaders to improve tasks with kaizen and QCC project.
 Presented monthly KPIs progress and improvement plan.
 Managed and ensure on-the-job-training for operators, supervisors, line leaders.
 Responded ISO14001 and ISO9001

LITE-ON ELECTRONICS 2007-2009 Lite-On Technology is a leading provider of innovative products for both global and domestic markets, including imaging products, encloses, power supplies and LEDs. Product Design and Development Engineer 2007-2009
 Designed new products to meet customer’s specification and requirements.
 Designed new process to simplify and implemented within production lines.
 Created BOM, set up all of specification control (data sheet, assembly spec.etc.) for new product and implemented them. Observed, analyzed and designed in applying Designed to selected current material or tooling which lower cost.
 Negotiated with supplier about specification and cost of new materials or tooling to get the best performance and yield.
 Cooperated with Taiwan procurement to find new materials and tooling including new source to replace some current non-useful parts. .
 Revised specification for current products for better outcome and align with the specification and requirements from customer.
 Sales team in Taiwan selected us as the pilot project of product design and sample made as the result, enabled to gain a significant order.
 Tested the product’s property to meet customer request such as I, V, W value.

JET-THAI HI-TECH 2006-2007 A manufacturer and distributor of CD and DVD an electrically XXXXX under the ‘CMC” Taiwan company. Production Engineer 2006-2007
 Led and set up manpower and resources for the new production as a whole.
 Standardized the production team and work flow to achieve the productivity within the target set and high quality.
 Quickly responded to sudden defects, rectified, resolved to ensure the continuity of production.