ตำแหน่ง Solids Control Engineer

บริษัท National Oilwell Varco (Thailand) Ltd.

ที่อยู่บริษัท Address: Units 1503, 15th RASA Tower 2, 555 Phaholyothin Road, Chatuchak Bangkok 10900

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
• Installation and commissioning of solids control systems: shakers, centrifuges, cuttings dryers, augers, vacuum unit, etc.
• Served as the lead operator for drilling waste management equipment and services, solids control optimization, shakers,
centrifuges, auger, cuttings dryer, pump, tank, agitator, vacuum unit, dewatering and filtration work.
• Troubleshooting and repairing mechanical and electrical systems, resolved equipment operation processes.
• Diagnosed equipment failures, conducted root cause analysis, and prepared detailed service reports.
• Maintained documentation including ITRs, daily reports, client sign-off forms, and QA checklists.
• Coordinated with logistics and procurement to manage offshore spare parts and inventory

ตำแหน่ง Turnover and Completions Engineer

บริษัท Bechtel International, Inc

ที่อยู่บริษัท Address: Unit No. 3239, 32nd Floor, Interchange 21 Building,No. 399 Sukhumvit Road, Klongtoey Nua, Wattana,Bangkok 10110

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Project Management Consultant for Thai Oil Clean Fuel Project, Sriracha
• Responsible for verifying Tags/ITRs/system/sub-system completions across all disciplines according to project spec.
• Coordinate each discipline on completions of inspection work according to inspection and test plan (ITP).
• Reviewed MST & Pre-com/Comm procedures and approved MC and RFSU dossiers according to system completions.
• In charge overall MCWD to handover and punch-list clearance across civil, mechanical, piping, EIT systems and etc.
• Documents review and coordinate with all other for issue the MC Certificate and RFSU Certificate.
• Coordinated between engineering, CSU, and construction to ensure timely turnover of systems.
• Delivered progress reports to CSU Manager with status of all MC/RFSU certificates.

ตำแหน่ง Project/Field Electrical Engineer (SEA Region)

บริษัท National Oilwell Varco (Thailand) Ltd.

ที่อยู่บริษัท Address: Units 1503, 15th RASA Tower 2, 555 Phaholyothin Road, Chatuchak Bangkok 10900

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
• Field survey for proposal activities.
• Deployed to over 30 offshore rigs (jack-up, tender, semi-sub) in Thailand, Singapore, Vietnam, China, Myanmar and etc.
• Manage installation and commissioning of mechanical and electrical systems for solids control equipment, ensuring full
operational readiness and on-time project completion.
• Lead operator for drilling waste management equipment and services, solids control optimization, shakers, centrifuges,
auger, cuttings dryer, pump, tank, agitator, vacuum unit, dewatering and filtration work.
• Troubleshooting and repairing mechanical and electrical systems, resolved equipment operation processes.
• Diagnosed equipment failures, conducted root cause analysis, and prepared detailed service reports.
• Coordinated with logistics and procurement to manage offshore spare parts and inventory.
• Maintained documentation including ITRs, daily reports, client sign-off forms, and QA checklists.
• Rotated on 28/28 offshore schedule, maintaining availability for emergency on-call services.

ประสบการณ์ทำงานอื่นๆ
SPIE Plexal Group – Senior E&I and Systems Engineer
Sep 2007 – Nov 2012
Chevron Bangladesh-Project
• Part of team delivered a Centum VP HMI and SCS ProSafe-RS for Chevron Bangladesh (JBGP Fire & Gas upgrade project).
• PLC programming, FAT/SAT testing and commissioning for Chevron Bangladesh MB-7& MB-9 wellhead platforms.
• EPC Project – Muchai Gas Compression Station
Participated in and fulfilled the technical requirements for electrical works.
Reviewed RFQs and bidder lists; evaluated equipment/material specifications and provided recommendations for
procurement and contracts.
Oversaw procurement packages including transformers, MCCs, power distribution boards, UPS & battery chargers,
grounding systems, lighting systems, cable trays, E&I cables, heat tracing, and bulk materials.
Provided E&I technical support during project installation phase.
Prepared and handed over project documentation as per project requirements.
• Site commissioning for HVAC system of a LQ module a Project of Brunei Shell, which under construction at PT. PROFAB
INDONESIA, Batam
Chevron Thailand-Project
• Integral part of team delivered SCADA Master Upgrade system for Chevron Benchamas field controlling approximately
30 platforms (200,000 tags) from the BLQ Control Room including the CPP and major Wellhead Platform BWA.
• Developed HMI displays & PLC programming, FAT/SAT testing and offshore commissioning for more than 7+ new on
Chevron wellhead platforms. (Wonderware ArchestrA, Honeywell HMIWeb and Control/CompactLogix).
Salamander Energy-Project
• Developed Wonderware SCADA HMI and PLC Configured for wellhead platform expansion, supporting 2 production
wells and 2 ESPs.
• Developed Wonderware SCADA HMI and PLC Configured supporting for MV switchgear REX521 and PQFI system.
• Conducted internal testing and FAT of the HMI system on behalf of Salamander.
• Established Modbus communication with ESP units and REX521 protection relays and PQFI active filters.
MCS Automation technology – Project E&I Engineer
July 2002 – Aug 2007
• Involved in the design, installation, and testing of terminal automation systems for oil & gas depot.(such as PTT, Bangchak,
Esso, PSP, IRPC, etc.) including Batch Controllers, MCCs, grounding, lighting systems, flow control valve, overfill
protection system, card readers system, ATG, mass flow meter, PLC cabinets, CCTV and talk back Systems.
• Performed preventive maintenance of PTT's Oil & LPG terminals for Truck Loading and generated reports.
• Modify top to Bottom loading rack for VRU & Installed grounding & overfill protection system.
• Experienced in electrical and instrumentation (E&I) installation in hazardous areas, complying with standards.
• Managed full-cycle: planning, material & vendor selection, site supervision, commissioning, and as-built documentation.
• ABB/ PTT – Saiyok BVW #7 Compressor Station Project, Supervised subcontractor work fronts for complete E&I
equipment installations. including transformers, MCCs, power distribution boards, UPS & battery chargers, grounding
systems, lighting systems, Fire & gas system, field instrument, cable trays, E&I cables, heat tracing, and bulk materials.
• Conducted planning, material & vendor selection, and as-built documentation.