ตำแหน่ง Principal Structure Designer

บริษัท CB&I Storage Solutions (Thailand) Ltd.

ที่อยู่บริษัท Chonburi

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Issued the structure drawing to Fabricator in Thailand.
 Review design from customer/owner for create RFI, create
schedule planning to team, and support the other
college if any required assistance to create another model.
 Checked GA Drawing, Assembly Drawing and Fitting Drawing on
My Team
 Prepared MTO for estimate cost new job.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Created the template report, template GA drawing assembly drawing and single part drawing.

ตำแหน่ง Senior Structure Designer Level 2

บริษัท Aibel (Thailand) Ltd.

ที่อยู่บริษัท rayong

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Shop designer.

ตำแหน่ง Project Leader

บริษัท GT Creations Ltd.

ที่อยู่บริษัท Krungthep

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Issued the structure drawing to Fabricator in United State.
Coordinate with Mike Owen Fabricator, Ahlborn Fabricator, Anvil
& Junior Steel Fabricator, Coast Iron Fabricator, Dupont Fabricator,
Gibson Fabricator, ReddIron Fabricator, Richardson Steel
Fabricator, S&G Fabricator, Schuff Fabricator,
 Issued the structure drawing to Fabricator Australia. Struc-tech
Fabricator.
 Review design from customer/owner for create RFI, create
schedule planning to customer/owner, and support the other
college if any required assistance to create another model.
 Finalize all Fabricator details and standard reference with latest
AISC. Structure Design, Architectural Design and Mechanical
design.
 Create 3D Model for fabrication assembly shop drawing such as
Module, Anchor bolt, Steel, Stair, Ladder, Handrail, Support
opening and Support MECH.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Create 2D Drawing for Fabricator
 Make a Fitting Drawing for Fabricator
 Checked GA Drawing, Assembly Drawing and Fitting Drawing on
My Team
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Compare new design (Next Revisions) with Latest design for
Create Man hour Revise Model.
 Make a schedule planning with maintain a revision of design.

ประสบการณ์ทำงานอื่นๆ
CB&I Storage Solutions (Thailand) Ltd.
Principal Structure Designer
Feb 15, 2024 – Jun 05, 2004
Project: Construction for Thailand.
 Issued the structure drawing to Fabricator in Thailand.
 Review design from customer/owner for create RFI, create
schedule planning to team, and support the other
college if any required assistance to create another model.
 Checked GA Drawing, Assembly Drawing and Fitting Drawing on
My Team
 Prepared MTO for estimate cost new job.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Created the template report, template GA drawing assembly drawing and single part drawing.

Freelance Drafter
Feb 2023 – May 2023
Project: Construction for Thai oil Project.
 Issued the structure drawing to Fabricator Sarcon
 Review design from customer/owner for create RFI, create
schedule planning to consulted customer/owner.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Create 2D Drawing for Fabricator






Thaiwater Engineering Co, Ltd.
Project Engineer
Oct 1, 2022 – Dec 29,2022
Project: Construction for Canada.
 Issued the structure drawing to Fabricator in Canada.
 Review design from customer/owner for create RFI, create
schedule planning to customer/owner, and support the other
college if any required assistance to create another model.
 Finalize all Fabricator details and standard reference with latest
AISC. Structure Design, Architectural Design and Mechanical
design.
 Create 3D Model for fabrication assembly shop drawing such as
Module, Anchor bolt, Steel, Stair, Ladder, Handrail, Support
opening and Support MECH.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Create 2D Drawing for Fabricator
 Make a Fitting Drawing for Fabricator
 Checked GA Drawing, Assembly Drawing and Fitting Drawing on
My Team
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Compare new design (Next Revisions) with Latest design for
Create Man hour Revise Model.
 Make a schedule planning with maintain a revision of design.

Aibel (Thailand) Ltd.
Senior Structure Designer Level 2
Apr 2022 – July 2022
Project: Construction for Bacalhau FPSO Project.
 Shop designer.

Freelance Drafter
July 2021 – Mar 2022
Project: Construction for Golden pass LNG (GPX) Project.
 Issued the structure drawing to Fabricator STP&I
 Review design from customer/owner for create RFI, create
schedule planning to consulted customer/owner.
 Finalize all Fabricator details and standard reference with latest
AISC.
 Create 3D Model for fabrication assembly shop drawing such as
Module, Anchor bolt, Steel, Stair, Ladder, Handrail, Support
opening and Support MECH.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Create 2D Drawing for Fabricator
 Fitting Drawing for Fabricator
 Checked and validated GA Drawing, Assembly Drawing and
Fitting Drawing on My Team
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Compare new design (Next Revisions) with Latest design for
Create Man hour Revise Model.
 Make a schedule planning with maintain a revision of design.

GT Creations Ltd.
Project Leader
June 2017 – June 2021
Project: Construction for Australia, United State.
 Issued the structure drawing to Fabricator in United State.
Coordinate with Mike Owen Fabricator, Ahlborn Fabricator, Anvil
& Junior Steel Fabricator, Coast Iron Fabricator, Dupont Fabricator,
Gibson Fabricator, ReddIron Fabricator, Richardson Steel
Fabricator, S&G Fabricator, Schuff Fabricator,
 Issued the structure drawing to Fabricator Australia. Struc-tech
Fabricator.
 Review design from customer/owner for create RFI, create
schedule planning to customer/owner, and support the other
college if any required assistance to create another model.
 Finalize all Fabricator details and standard reference with latest
AISC. Structure Design, Architectural Design and Mechanical
design.
 Create 3D Model for fabrication assembly shop drawing such as
Module, Anchor bolt, Steel, Stair, Ladder, Handrail, Support
opening and Support MECH.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Create 2D Drawing for Fabricator
 Make a Fitting Drawing for Fabricator
 Checked GA Drawing, Assembly Drawing and Fitting Drawing on
My Team
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Compare new design (Next Revisions) with Latest design for
Create Man hour Revise Model.
 Make a schedule planning with maintain a revision of design.

Freelance Draft man
January 2016 – March 2017
Project: Trinity Dynamic Corporation Co., Ltd Plant
Client: Trinity Dynamic Corporation Co., Ltd
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Warehouse Plant, Foundation, Stair, and Canopy.
 Make a Drawing GA (General Arrangement) and Isometric
Drawing.
 Prepared of Material, Report weight, Consumable.
 Prepared Bill of Materials (BOM), Product Specification Sheets.
 Coordinate with Production to build and fabricate
 Develop & revised a drawing reference to install on sited.

GT Creations Ltd.
Draft man
October 2014 –November 2015
Project: Construction for Australia, US.
 Issued a drawing to Fabricator US. Mike Owen Fabricator, Ahlborn
Fabricator, Anvil & Junior Steel Fabricator, Coast Iron Fabricator,
Dupont Fabricator, Gibson Fabricator, ReddIron Fabricator,
Richardson Steel Fabricator, S&G Fabricator, Schuff Fabricator,
 Issued a drawing to Fabricator Australia. Struc-tech Fabricator.
 Review design from owner for create RFI, Create schedule to
owner, and support the other college if any required assistance to
create another model.
 Finalize all Fabricator Details and Standard Reference with Latest
AISC.
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Module, Anchor bolt, Steel, Stair, Ladder, Handrail, Support
opening, and Support MECH.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Create 2D Drawing for Fabricator
 Fitting Drawing for Fabricator
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Compare new design (Next Revisions) with Latest design for
Create Man hour Revise Model.
 Make a schedule planning with maintain a revision of design.


A-TEC THAI ENGINEERING CO.LTD
Draft man
July 2014 – September 2014
Project: Q-BIC Plant
Client: Q-BIC
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Module, Foundation, Stair, and Handrail.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight, Consumable.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Develop & Revised Drawing Reference to install on sited
 Coordinate with Production to build and fabricate




CUEL Co.,Ltd.
Draft man
July 2013 – June 2014
Project: IPEX Ichithys Onshore LNG Facilities
Client: JCK AUSTRALIA LNG PTY LTD
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Module, Stair, Ladder, Handrail, Grating.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight,
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Develop & Revised Drawing Reference to install on sited.
 Prepared drawing a weld history, weld map for Fabrication.

Eurotech International Ltd.
Draft man
June 2010 – June 2013
Project: Macedon Gas Plant Project, Gorgon Project, LYNWOOD Project,
ENSENADA DE BARRAGAN CC POWER Plant Project, ETC.
Client: Chevron Group
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Module, Stair, Ladder, Handrail, Grating, and Frame Etc.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight, Consumable.
 Assembly Shop Drawing Referenced Design Drawing form Client.
 Develop & Revised Fabrication Drawing.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.

Freelance
June 2009 – May 2010
Project: Macedon Gas Plant Project
Client: Chevron Group
 Meeting with The Customer to Clear Drafting Scope and
specification to set up
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Stair, Conveyers, Cabinet, Grating.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight, Consumable.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Coordinate with Production to build and fabricate
 Follow up the customer satisfaction
 Develop & Revised Drawing Reference to Install on Sited.

DP Advance Chonburi Co, Ltd
Cad Designer
February 2006 - MAY 2009
 Meeting with The Customer to Clear Drafting Scope and
specification to set up
 Create 3D Model for Fabrication Assembly Shop Drawing such as
Stair, Conveyers, Cabinet, Grating.
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight, Consumable.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Coordinate with Production to build and fabricate
 Follow up the customer satisfaction
 Drawing GA (General Arrangement) and Isometric Drawing.
 Prepared of Material, Report weight, Consumable.
 Prepared Bill of Materials (BOM), Product Specification Sheets and
Quality Assurance Documents.
 Develop & Revised Drawing Reference to Install on Sited.