ข้อมูลส่วนตัว สำหรับสมาชิกเท่านั้น ชาย (โสด) ไทย พุทธ 08-พฤศจิกายน-2539 อายุ 27ปี 180 Cm หนัก 95 Kg เกณฑ์แล้ว ข้อมูลการติดต่อ สำหรับสมาชิกเท่านั้น สงขลา (ระโนด) สำหรับสมาชิกเท่านั้น สำหรับสมาชิกเท่านั้น สำหรับสมาชิกเท่านั้น สำหรับสมาชิกเท่านั้น โทรศัพท์ , Email , ไลน์ไอดี ข้อมูลทั่วไป วิศวกรรมอุตสาหการ/เครื่องกล/โรงงาน งานประจำ (Full Time) 30,000บาท ขึ้นไป 10 พ.ค. 2567 10 พ.ค. 2567 JobTH.com | ประวัติการศึกษาสูงสุด จบการศึกษาแล้ว ในปี พศ. 2562 ปริญญาตรี มหาวิทยาลัยเทคโนโลยีราชมงคลศรีวิชัย วิศวกรรมศาสตรบัณฑิต วิศวกรรมเครื่องกล 3.31 มัธยมศึกษาต้น-ปลาย โรงเรียนระโนดวิทยา มัธยม วิทย์-คณิต 3.34 ประวัติการทำงาน 0 ปี มกราคม 2567 ถึง พฤษภาคม 2567 Project Engineer & Construction Engineer Tantawan Construction & Service Co.,Ltd 613/13 หมู่ 2 ถนนสงขลา-จะนะ ตำบลพะวง อำเภอเมืองสงขลา สงขลา 90100 สำหรับสมาชิกเท่านั้น : Manage project schedule, supervise, material take-off, logistics arrangement (materials, manpower, etc.) : Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.) : Prepare JSA, Permit-to-work and other related dossiers. : Lead toolbox meetings prior to starting work. : Supervise and carry out work site preparation. : Supervise and carry out piping fabrication, installation, pressure test and pre commissioning : Supervise and perform other construction work. : Suggest and make a decision on unexpected problem solutions at site and coordinate. : Onshore engineering team for technical solution that requires engineering support. : Prepare work progress reports. : Ensure that all work is carried out safely in accordance with COMPANY safety procedure. : Ensure that work quality meets or exceeds COMPANY standard and requirements. : Prepare project work breakdown scope (WBS for support bidding) : Prepare project work breakdown scope (WBS for project award) : Prepare project Team Alignment (Manpower plan) : Prepare project schedule (EPCIC scope, Master plan) : Prepare MTO & consumable (Procurement plan) : Prepare equipment (Equipment plan) : Prepare project document concern (Project master list) : Prepare project budget (Budget plan) : Conduct meeting with project (KOM meeting, pre-work) : Manage project completed with plan relate safety, quality & environment target : Control project onshore progress (Project fabrication & onshore progress) : Control project offshore progress (Project installation & offshore progress) : Control project cost (Cost control, weekly, monthly, project completed) : Submit project onshore progress (Project fabrication & onshore report) : Submit project offshore progress (Project installation & offshore report) : Submit project cost report (Cost control, weekly, monthly, project completed) : Prepare document support close out (Final document, T/N, Handover, Completion certificate) : Conduct meeting with project completed (AAR meeting with sharing lesson learn) : Prepare document with customer feedback (Customer satisfaction) : Manage project schedule, supervise, material take-off, logistics arrangement (materials, manpower, etc.) : Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.) : Prepare JSA, Permit-to-work and other related dossiers. : Lead toolbox meetings prior to starting work. : Supervise and carry out work site preparation. : Supervise and carry out piping fabrication, installation, pressure test and pre commissioning : Supervise and perform other construction work. : Suggest and make a decision on unexpected problem solutions at site and coordinate. : Onshore engineering team for technical solution that requires engineering support. : Prepare work progress reports. : Ensure that all work is carried out safely in accordance with COMPANY safety procedure. : Ensure that work quality meets or exceeds COMPANY standard and requirements. : Prepare project work breakdown scope (WBS for support bidding) : Prepare project work breakdown scope (WBS for project award) : Prepare project Team Alignment (Manpower plan) : Prepare project schedule (EPCIC scope, Master plan) : Prepare MTO & consumable (Procurement plan) : Prepare equipment (Equipment plan) : Prepare project document concern (Project master list) : Prepare project budget (Budget plan) : Conduct meeting with project (KOM meeting, pre-work) : Manage project completed with plan relate safety, quality & environment target : Control project onshore progress (Project fabrication & onshore progress) : Control project offshore progress (Project installation & offshore progress) : Control project cost (Cost control, weekly, monthly, project completed) : Submit project onshore progress (Project fabrication & onshore report) : Submit project offshore progress (Project installation & offshore report) : Submit project cost report (Cost control, weekly, monthly, project completed) : Prepare document support close out (Final document, T/N, Handover, Completion certificate) : Conduct meeting with project completed (AAR meeting with sharing lesson learn) : Prepare document with customer feedback (Customer satisfaction) ตุลาคม 2563 ถึง ธันวาคม 2566 Project Engineer & Construction Engineer LS engineering and construction co. ltd HV3+C53 ตำบล ชิงโค อำเภอ สิงหนคร สงขลา 90280 สำหรับสมาชิกเท่านั้น : Manage project schedule, supervise, material take-off, logistics arrangement (materials, manpower, etc.) : Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.) : Prepare JSA, Permit-to-work and other related dossiers. : Lead toolbox meetings prior to starting work. : Supervise and carry out work site preparation. : Supervise and carry out piping fabrication, installation, pressure test and pre commissioning : Supervise and perform other construction work. : Suggest and make a decision on unexpected problem solutions at site and coordinate. : Onshore engineering team for technical solution that requires engineering support. : Prepare work progress reports. : Ensure that all work is carried out safely in accordance with COMPANY safety procedure. : Ensure that work quality meets or exceeds COMPANY standard and requirements. : Prepare project work breakdown scope (WBS for support bidding) : Prepare project work breakdown scope (WBS for project award) : Prepare project Team Alignment (Manpower plan) : Prepare project schedule (EPCIC scope, Master plan) : Prepare MTO & consumable (Procurement plan) : Prepare equipment (Equipment plan) : Prepare project document concern (Project master list) : Prepare project budget (Budget plan) : Conduct meeting with project (KOM meeting, pre-work) : Manage project completed with plan relate safety, quality & environment target : Control project onshore progress (Project fabrication & onshore progress) : Control project offshore progress (Project installation & offshore progress) : Control project cost (Cost control, weekly, monthly, project completed) : Submit project onshore progress (Project fabrication & onshore report) : Submit project offshore progress (Project installation & offshore report) : Submit project cost report (Cost control, weekly, monthly, project completed) : Prepare document support close out (Final document, T/N, Handover, Completion certificate) : Conduct meeting with project completed (AAR meeting with sharing lesson learn) : Prepare document with customer feedback (Customer satisfaction) : Manage project schedule, supervise, material take-off, logistics arrangement (materials, manpower, etc.) : Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.) : Prepare JSA, Permit-to-work and other related dossiers. : Lead toolbox meetings prior to starting work. : Supervise and carry out work site preparation. : Supervise and carry out piping fabrication, installation, pressure test and pre commissioning : Supervise and perform other construction work. : Suggest and make a decision on unexpected problem solutions at site and coordinate. : Onshore engineering team for technical solution that requires engineering support. : Prepare work progress reports. : Ensure that all work is carried out safely in accordance with COMPANY safety procedure. : Ensure that work quality meets or exceeds COMPANY standard and requirements. : Prepare project work breakdown scope (WBS for support bidding) : Prepare project work breakdown scope (WBS for project award) : Prepare project Team Alignment (Manpower plan) : Prepare project schedule (EPCIC scope, Master plan) : Prepare MTO & consumable (Procurement plan) : Prepare equipment (Equipment plan) : Prepare project document concern (Project master list) : Prepare project budget (Budget plan) : Conduct meeting with project (KOM meeting, pre-work) : Manage project completed with plan relate safety, quality & environment target : Control project onshore progress (Project fabrication & onshore progress) : Control project offshore progress (Project installation & offshore progress) : Control project cost (Cost control, weekly, monthly, project completed) : Submit project onshore progress (Project fabrication & onshore report) : Submit project offshore progress (Project installation & offshore report) : Submit project cost report (Cost control, weekly, monthly, project completed) : Prepare document support close out (Final document, T/N, Handover, Completion certificate) : Conduct meeting with project completed (AAR meeting with sharing lesson learn) : Prepare document with customer feedback (Customer satisfaction) ไม่ได้ระบุ Project Engineer & Draftsman A V P (THAILAND) COMPANY LIMITED ถนน สงขลา-จะนะ ตำบลพะวง อำเภอเมืองสงขลา สงขลา 90100 สำหรับสมาชิกเท่านั้น Researching whether the design material will work and be cost-effective as requirement specification : Site survey for scope of works. Clarify scope of works, create drawing and materials take off : Prepare JSA, Permit to work and other related dossiers. : Lead toolbox meetings prior to starting work. : Supervise and carry out work site preparation. : Suggest and make a decision on unexpected problem solutions at site and coordinate. : Prepare work progress reports 2018 - 2020 : Food Machinery Co., Ltd. Position : Project Engineer & Draftsman Responsibilities : Prepare user requirement specification, Material flow, data flow, process / operation layout, handing tools : Equipment, machines, operation, infrastructure, and utilities for new process that best serving management : Site survey onsite for layout machine : Arrange machine layout with 3D software : Prepare tool and equipment for installation on site : Prepare and order consumable to support installation on site : Prepare information for meeting with client : Lead toolbox meetings prior to starting work : Supervise and carry out work site preparation : Meeting daily, weekly, and monthly for update progress with client : Prepare work progress reports : Plan the transportation of machines to the site 2017-2018 : Top glove technology (Thailand) co. ltd Position : Apprentice mechanical engineer Responsibilities : Assist mechanical engineer : Prepare daily report : Supervise and carry out work site preparation ประวัติการฝึกอบรม ความสามารถ ความสามารถทางภาษา พูด (ดีมาก) อ่าน (ดีมาก) เขียน (พอใช้) พูด (ดี) อ่าน (ดี) เขียน (ดี) ไทย 30-50 คำ/นาที อังกฤษ 30-40 คำ/นาที รถยนต์ , รถยนต์ , โครงการ / ผลงาน / เกียรติประวัติ / บุคคลอ้างอิง Project Reference 2020 - Present : Onshore (fabrication piping, support, Structural) & Offshore (Installation piping, support and structural) : G2S-MOD-23010: 42” Gas Export Pipeline Low Operating Pressure: Thermowell, Transmitter and Stonewall valve Replacement : G2S-MOD-22012: To Modify Piping of 2D-5326A/B Inlet and Add Purge Line for 2D-5325A/B and 2D-5326A/B : APP: ART-WRK-24001 Anomaly Welding Repair : ART-WRK-23008 Welding repair corroded stainless pipes Onshore & Offshore : Notification 2023 G1 Lot#13_Onshore : Notification 2024 G1 Lot#1_Onshore : ART-WRK-23008 Welding repair corroded stainless pipes G2_Onshore : SA-PRO-22003 TRWI Hook Up flow line G1_Onshore & Offshore : FI-HUC-0031 SGWA Hook Up flow line G1_Onshore & Offshore : G2N-WRK-22004 Replace defective piping in FSD2023 G2_Onshore & Offshore : G2N-WRK-22017 LP Fuel gas defective valves and orifice flanges replacement G2_Onshore & Offshore : G2N-PRO-21006 WP23 Infill Hook up _Onshore & Offshore : G2N-WRK-22014 Permanent Repair of 8-OW-50100-B03 in FSD G2_Onshore & Offshore : G2N-WRK-22008 Partial Replacement of Piping Lines in FSD2023 G2_Onshore & Offshore : G2N-MOD-22054 Replace-repair pilot gas and flame front line of HP flare at FP G2_Onshore & Offshore : G2N-MOD-22005 UPGRADE LOCAL PNEUMATIC CONTROLLER TO DCS CONTROL G2_Onshore & Offshore : G2N-MOD-21011 Upgrade GBN Water Injection System Tie-In-FSD G2_Onshore & Offshore : G2N-MOD-22003 PP Instrument Air Header Replacement G2_Onshore & Offshore : ART-NOD-22009 ART AT-1-D Injector Well Conversion G2_Onshore & Offshore : G2N-MOD-22023 WPS17 Hook up flow line G2_Onshore & Offshore : G2N-PRO-21006 WP23 Infill Hook up flow line G2_Onshore & Offshore : GBN-MOD-21023 WP10 Infill Hook Up flow line G2_Onshore & Offshore : G2N-MOD-21007 WP46 Hook Up flow line G2_Onshore & Offshore : GBN-MOD-21016 WP20 Infill Hook Up flow line G2_Onshore & Offshore : GBN-MOD-21009-WP13 Infill Hook Up flow line G2_Onshore & Offshore : G2N-MOD-22023 WP48 Hook Up flow line G2_Onshore & Offshore : G2N-MOD-21020 Alternative utility air supply line to PP Air compressor G2_Onshore & Offshore : G2N-PRO-21007 WP43 Infill Hook up flow line G2_Onshore & Offshore : GBN-MOD-21006 WP1-F gas to water well conversion line G2_Onshore & Offshore : ART-WRK-21005-AWP3N Infill Hook Up line flow line G2_Onshore & Offshore : ART-WRK-21002-AWP9 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21014 -WP2 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21010 -WP6 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21012-WP22 Infill Hook Up line flow line G2_Onshore & Offshore : ART-WRK-21008 AWP21 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21008 WP31 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21007 WP38 Infill Hook Up line flow line G2_Onshore & Offshore : G2N-MOD-21007 WP47 Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21015 WP33 Hook Up line flow line G2_Onshore & Offshore : ART-WRK-21010 AWP39 Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-21011-WP9 Infill Hook Up line flow line G2_Onshore & Offshore : GBN-MOD-19037 WP29 Infill Hook Up flow line G2_Onshore & Offshore : GBN-MOD-19036 WP28 Infill Hook Up flow line G2_Onshore & Offshore : GBN-MOD-19034 WP16 Infill Hook Up flow line G2_Onshore & Offshore : ART-WRK-20006 AWP38 Hook Up flow line G2_Onshore & Offshore : ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP30_Onshore & Offshore_Onshore & Offshore : ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP31 _Onshore & Offshore_Onshore & Offshore : ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP32_Onshore & Offshore_Onshore & Offshore : ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP34_Onshore & Offshore : GBN-MOD-19033 WP5 Infill Hook Up flow line G2_Onshore & Offshore : GBS-MOD-19022 Repairing of corroded heating medium pipe GBS FSD 2020_Onshore & Offshore : GBS-MOD-19005 2BDV-39420 full welded butt replacement due to valve can't open in spec GBS FSD 2020_Onshore & Offshore : GBS-MOD-19023 Install permanent vent line of Mem Guard Vessels_Onshore & Offshore : ART-WRK-21003-AWP7 Infill Hook Up flow line G2_Onshore & Offshore : ART-WRK-21004-AWP1N Infill Hook Up flow line G2_Onshore & Offshore : GBN-MOD-19030-WP32 Infill Hook Up flow line G2_Onshore & Offshore : ART-WRK-20006 AWP38 Hook Up_Onshore & Offshore : GBN-MOD-19034 WP16 Infill Hook Up_Onshore & Offshore : GBN-MOD-19036 WP28 Infill Hook Up_Onshore & Offshore : GBN-MOD-19037 WP29 Infill Hook Up_Onshore & Offshore : THC 21-5388 PROVISION OF WELL HOOK UP CALL-OFF SERVICES CONTRACT FOR G1/61 : THC 21-5378 Provision of Wellhead Platform Brownfield Modification for G2/61 (Bundle 3 Phase 1B) : THC 18-5169 Offshore Construction Call-Off : THC 22-5115 Provision of Offshore Construction Call-out Service : THC 22-5110 Provision of Offshore Construction Call-out Service. : THC 21-5259 Provision of Well Hook Up Call-off Services Contract for G2/61 : THC 18-5012 Provision of Well Hook Up services for Bongkot and Arthit fields (Call off Services) : Construction Engineer, as Supply Manpower LS Shop : Call for Tender no. THC20-5145 the Provision of Splash Zone Coating Services for G1/61, G2/61, G8/50 and Arthit Asset (Call-Off) : Fabricate WH support for 4 rigs : SUPPLY SCAFFOLDING MATERIAL AND MANPOWER (Confined Space) : Blasting & Painting for Container 10 Units_Onshore : Fabrication toolbox basket 6 m X 1.5 m x 1.1 m_Onshore : Fabrication rack nitrogen_Onshore : Fabrication container 20’ : Fabrication 2 Unit Base Oil Storage Basket_Onshore : Fabrication project support PTTEP_Onshore : Fabrication project support Expo_Onshore : Fabrication project support Halliburton_Onshore : Fabrication project support MPC KINITIC_Onshore สำหรับสมาชิกเท่านั้น |