ข้อมูลส่วนตัว

สำหรับสมาชิกเท่านั้น

ชาย (โสด)

ไทย

พุทธ

09-ธันวาคม-2534    อายุ 33ปี

172 Cm    หนัก 75 Kg

รด.
ข้อมูลการติดต่อ

สำหรับสมาชิกเท่านั้น

นครศรีธรรมราช (พระพรหม, เมืองนครศรีธรรมราช)

สำหรับสมาชิกเท่านั้น

สำหรับสมาชิกเท่านั้น

สำหรับสมาชิกเท่านั้น

สำหรับสมาชิกเท่านั้น

โทรศัพท์
ข้อมูลทั่วไป

วิศวกรรมโยธา/สำรวจ

งานประจำ (Full Time)

QC engineer of precast concrete, Office Engineer, estimate engineer

25,000บาท ขึ้นไป

18 มี.ค. 2568

17 เม.ย. 2568

JobTH.com
ตำแหน่งที่สนใจ
QC engineer of precast concrete, Office Engineer, estimate engineer
ประวัติการศึกษาสูงสุด
จบการศึกษาแล้ว ในปี พศ. 2558
ปริญญาตรี มหาวิทยาลัยสงขลานครินทร์
วิศวกรรมศาสตร์
วิศวะโยธา
2.17
มัธยมศึกษาต้น-ปลาย รร.เบญจมราชูทิศ นครศรีธรรมราช
มัธยมปลาย
วิทย์-คณิต
2.7
ประวัติการทำงาน
5 ปี
กุมภาพันธ์ 2564  ถึง   กันยายน 2566
วิศวกรโยธา
STP 2017 COMPANY LIMITED (Trang subsidiary)
14/13 หมู่10 ถ.ตรัง-ปะเหลียน ต.โคกหล่อ อ.เมือง จ.ตรัง 92000
สำหรับสมาชิกเท่านั้น

- Validate BOQ from the contractor.
- Validate shop drawings.
- Reproduction, Estimation and Specifications
- Participate to build factory, warehouse, factory office, worker’s house, concrete road in factory and drain pipes work etc. when the company is expanding production base at Krabi and Chon Buri.
- Monitoring and control facility construction of site.
- Communicating and coordination with concrete plant, consultant, contractor, co-workers and project owner.
- Management about addition-reduction of work
- Make monthly report and send to PM
พฤษภาคม 2561  ถึง   ธันวาคม 2563
วิศวกรโยธาปฏิบัติการ
Nawarat Patanakarn Public Company Limited
31/13 หมู่2 ถ.พระราม2 ต.บางกระเจ้า อ.เมือง จ.สมุทรสาคร 74000
สำหรับสมาชิกเท่านั้น

- Productions control of reinforced concrete structure such as prestressed concrete pile/floor, jacking pipe, manhole, intervention shaft (IVS) for TBM, septic tank, electrical conduit, barrier, retaining wall, parapet, counterweight etc.
- Reproduction, Estimation and Specifications.
- Calculate the number of materials and check stock of materials.
- Work planning in daily, weekly, monthly and half of yearly after that report to manager every week.
- Crete report before (steel work) and after (concrete work) to consult or customer.
- Prepare bar-cut list and assign to steel job responsible person.
- Control and plan for steel building work, pouring concrete work and maintenance of formwork.
- Validate shop drawing from customer, modify and adjust to complete it.
- Validate product before export to customer and go to solve problems at the job site of customer sometimes.
- Validate laboratory work about sieve analysis, concrete slump test, compressive strength test of concrete and tension test of steel.
- Validate fixed hours, over time and hourly rate of daily worker.
พฤษภาคม 2556  ถึง   กรกฎาคม 2556
ฝึกงานวิศวกรโยธา
Office of Rural Roads No. 12 (Songkhla) – Department of Rural Roads
104 สข.4047 ถ.ทุ่งควนจีน กม.1+650 หมู่ 6 ตำบลควนลัง อำเภอหาดใหญ่ จังหวัดสงขลา 90110
สำหรับสมาชิกเท่านั้น

- Survey. (งานสำรวจเส้นทาง)
- Reproduction, Estimation and Specifications of Road and bridge construction. (งานถอดปริมาณถนนและสะพาน)
- Laboratory work about Sieve analysis, Concrete slump test, Compressive strength test of concrete and Hot-mix asphalt paving (งานทดสอบ ดิน, คอนกรีต, Asphaltic Concrete และ Sieve)
- Asphaltic Repair (งานซ่อมถนนยางมะตอยรูปแบบต่างๆ) เช่น การอุดรอยแตก (Crack Filling), การฉาบผิวทางแบบฟ็อกซีล (Fog Seal), การฉาบผิวทางแบบชิพซีล (Chip Seal), การปะซ่อมผิวทาง (Skin Patching), การขุดซ่อมผิวทาง (Deep Patching)
- Street light pole equips (งานฐานเสาไฟถนน)
- งานวางท่อระบายน้ำ
- งานสีเส้นถนน, ป้ายบอกทาง, Gard Code, Gard Rail, Rumble Strip
- งานรีไซคลิ่ง (Recycling)

23 ตุลาคม 2566 - ปัจจุบัน
บริษัท เบสท์-แพค คอนกรีต จำกัด สาขา แปลงยาว
ที่อยู่บริษัท : 150 หมู่ที่ 2 ถนนบุรีรัมย์-สตึก ตำบลบ้านด่าน อำเภอบ้านด่าน จ.บุรีรัมย์ 31000
ตำแหน่ง : วิศวกรโยธา แผนก แบบและBOM
เงินเดือน : 31,600 บาท
ลักษณะงานที่ทำ
- ออกแบบและเขียนแบบผลิตภัณฑ์คอนกรีตเสริมเหล็กและคอนกรีตอัดแรงด้วยโปรแกรม Auto-CAD ตามมาตรฐาน มอก., ทล.2015, ทช. และ มยผ. เช่น เสาเข็มตอก, เสาเข็มเขื่อน, เสาเข็มBearing, เสาเข็มสปัน, Box Culvert, ท่อกลม, I Girder เป็นต้น
- ประสานงานเซลล์เกี่ยวกับรายละเอียดแบบและผลิตภัณฑ์ที่ลูกค้าต้องการ เพื่อให้เป็นไปตามความต้องการของลูกค้า
- ตรวจสอบการเข้าแบบก่อนเทและตรวจสอบชิ้นงานหลังเทคอนกรีต
- ทำเอกสารและรายการคำนวณ Blow Count เมื่อ Site Engineer ต้องการ
ประวัติการฝึกอบรม
ความสามารถ
ความสามารถทางภาษา

พูด (ดีมาก)   อ่าน (ดีมาก)   เขียน (ดีมาก)

พูด (ดี)   อ่าน (ดี)   เขียน (ดี)

ไทย คำ/นาที    อังกฤษ คำ/นาที

รถยนต์ ,รถจักรยานยนต์ ,

รถยนต์ ,

Auto-CAD, MS Office
โครงการ / ผลงาน / เกียรติประวัติ / บุคคลอ้างอิง


สำหรับสมาชิกเท่านั้น