ข้อมูลส่วนตัว สำหรับสมาชิกเท่านั้น หญิง (โสด) ไทย พุทธ 13-เมษายน-2540 อายุ 25ปี 173 Cm หนัก 59 Kg ข้อมูลการติดต่อ สำหรับสมาชิกเท่านั้น กรุงเทพมหานคร (ประเวศ (อ่อนนุช), สวนหลวง) สำหรับสมาชิกเท่านั้น สำหรับสมาชิกเท่านั้น สำหรับสมาชิกเท่านั้น โทรศัพท์ , Email ข้อมูลทั่วไป วิศวกรรมเคมี งานประจำ (Full Time) 30,000บาท ขึ้นไป 18 มี.ค. 2564 18 มี.ค. 2564 JobTH.com | ประวัติการศึกษาสูงสุด จบการศึกษาแล้ว ในปี พศ. ไม่ได้ระบุ ปริญญาตรี Kasetsart university Bachelors degreee Chemical engineering 3.17 ประวัติการทำงาน 2 ปี มิถุนายน 2562 ถึง มีนาคม 2564 Process engineer JFE Mitr Project Services Co., Ltd. UM Tower ชั้น 22 เลขที่ 9 ถ.รามคำแหง แขวง สวนหลวง เขต สวนหลวง กทม 10250 สำหรับสมาชิกเท่านั้น Prepare and draw the P&ID by AutoCAD, Line schedule, Test pressure package for M/C and Pre-commissioning, Hydraulic calculation and Fire-fighting system calculation (e.g. amount of spray nozzle and size orifice) and clarify and re-check the detail of special specification process liquid, equipment or operating condition for petrochemical industry project (EPC). ประวัติการฝึกอบรม ความสามารถ ความสามารถทางภาษา พูด (ดีมาก) อ่าน (ดีมาก) เขียน (ดีมาก) พูด (ดี) อ่าน (ดีมาก) เขียน (ดีมาก) ไทย คำ/นาที อังกฤษ คำ/นาที รถยนต์ ,รถจักรยานยนต์ , TOEIC score : 730 MS office , AutoCAD , ASPEN Plus , PRO/II , Navisworks , HTRI โครงการ / ผลงาน / เกียรติประวัติ / บุคคลอ้างอิง Senior Project : Estimating the kinetic parameters of polyethylene from Borstar-Process with multiple site types catalyst by Deconvolution method. The polyethylene structures significantly affect the final properties and applications. Polyethylene have been used in a wide range of applications. Polyethylene are generally produced on multiple-site-type catalyst, where each site type has different kinetic parameters and, therefore, produces polyethylene with different structures. At present, no characterization technique can directly estimate kinetic parameters of each site type. Deconvolution is a technique used to estimate the number of site-type and kinetic parameters of each site-type. This project studied estimation of kinetic parameter of polyethylene produced from multiple site-type catalysts in Borstar process, which consists of 2 reactors in series. The model was developed for the deconvolution of Molecular Weight Distribution (MWD) and Short-Chain Branching Distribution (SCB). From the deconvolution of Molecular Weight Distribution (MWD) and Short-Chain Branching Distribution (SCB) of polyethylene produced from Borstar process. It was found that technique can adequately estimate kinetic parameters of polyethylene produced on each site-type in each reactor. The results were found to be in a good agreement with the results previously reported in the literature. สำหรับสมาชิกเท่านั้น |