ประวัติการทำงาน

ประสบการณ์ทำงานทั้งหมด 10 ปี

เมษายน 2559 ถึง เมษายน 2560

ตำแหน่ง Production Supervisor

บริษัท OKUDA SEIKO THAILAND ( JAPANESE COMPANY )

ที่อยู่บริษัท Chonburi

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1.Set up Line Injection Mold Plastic , Line Assembly And Design position area for put New Injection Machine All follow balance process( NEW FACTORY )
2.Set up Machine condition and set up Robot for take out Product.
3.Checking Condition of New mold.
4.Trial New Condition of Injection Mold and Start Production.
5.Set Condition standard and Make working standard , working instruction.
6.Control Material and Production Planning.
7.Report Productivity for Production Meeting.
8.Control Manpower for Production injection section.
9.In-charge Safety Supervisor for injection section.
10.Maintenance mold and Repair.
11.Set up Preventive Maintenance of Machine.
12.Design Jig and fixture for work in process.
13.Improvement Production Line in process.
14.Set up Standard time process.
15.Make All document for support ISO-9000.ISO-14000.(Now making All document for Support TS-16949)
16.Solving problem injection Machine when have problem and set up Master plan for PM Machine and Tooling.
17.Checking for Mold condition (when have problem with mold) and Action to solve a problem in Mold.
18.Leader of injection section for control production plan and man power to support next process(for just in time target).
19.Management Man power and Control overall of Production Line All section. (Injection,Mold M/N,Assembly) follow the target of production plan.
20.Management Meeting member for Report Productivity of Production.
21.Team Leader of 5S and Kaizen Project.
22.Team Leader of New model (FMEA,APQP)
23.Team Leader of Internal Audit for TS-16949
24.Make training Plan and monitoring of the evaluation for training continues to employee.
25.Team Leader for Control Master Plan of PM Injection Machine.
26.Analysis of problems to Los waste in the production line.
27.Emergency Center when have a Problem about Facilities of Factory.(Electric power,Air pump pressure,Emergency
fire alarm)
28.Management Man power and Control of Production Line All section. (Injection , Mold M/N , Assembly) follow the target of production plan.
29.Maintain and preform as the company policy and rule strictly.

เมษายน 2557 ถึง เมษายน 2559

ตำแหน่ง Production Assistant Manager

บริษัท TAKAHATA PRECISION THAILAND ( JAPANESE COMPANY ).

ที่อยู่บริษัท Rayong

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1.Set up Line Injection Mold Plastic , Line Assembly , And Design position area for put New Injection Machine All follow balance process( NEW FACTORY )
2.Make All document for support ISO-9001.ISO-14001.
3.Deploy&ensure the operation compliance with company's strategic & policy under the KPIs / Performance base system.
4.Establishes the team based work culture and the effectiveness of cooperator and collaboration needed to staff and maintain the performance levels.
5.Control and analyze the production data on daily basis in order to follow the performance and prevent reporting mistakes.
6.Proposes and implements the related action plans in order to improve the plant performance.
7.Take the response for production activities to ensure the cost , quality,Productivity and output performance.
8.Manage the component machining to assure required quality and productivity level and to meet production schedules,cost and quality target and manage supplier is in respect to schedule and delivery.
9.Develop,analyze,implement and maintain budgets for all costs for manufacturing operations.Assist in driving the necessary costs for energy, material/procurement,,and growth activities for improvement.
10.Analyze customer claim and take action in order to prevent their recurrence.
11.Propose and implement action plans in order to improve product quality.
12.Participate to transfer the new production line or equipment and push on process for successful.
13.Establish the manpower plans for all manufacturing operations balancing productivity and manpower capacity to determine optional manpower requirements.
14.Set of guidelines / plans (Master Plan) of the parties in accordance with the strategy and policies of the factory.
15.Involved in the targeting and implementation of the policy.
16.Management consulting and supervisory practices in the following areas according to the defined plan of action.
17.Plan capacity. According to estimates (Forecast) received from the marketing department.
18.Make recommendations to the planning department and the production department can manage them effectively.
19.Analyze and Make report on daily output operational issues Manager (Japanese).

เมษายน 2550 ถึง เมษายน 2557

ตำแหน่ง Production Supervisor

บริษัท NIPPON SEIKI THAILAND ( JAPANESE COMPANY )

ที่อยู่บริษัท Chonburi

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1.Set up Line Injection Mold Plastic , Line AssemblyAnd Design position area for put New Injection Machine All follow balance process( NEW FACTORY )
2.Set up Machine condition and set up Robot for take out Product.
3.Checking Condition of New mold.
4.Trial New Condition of Injection Mold and Start Production.
5.Set Condition standard and Make working standard , working instruction.
6.Control Material and Production Planning.
7.Report Productivity for Production Meeting.
8.Control Manpower for Production injection section.
9.In-charge Safety Supervisor for injection section.
10.Maintenance mold and Repair.
11.Set up Preventive Maintenance of Machine.
12.Design Jig and fixture for work in process.
13.Improvement Production Line in process.
14.Set up Standard time process.
15.Make All document for support ISO-9000.ISO-14000.(Now making All document for Support TS-16949)
16.Solving problem injection Machine when have problem and set up Master plan for PM Machine and Tooling.
17.Checking for Mold condition (when have problem with mold) and Action to solve a problem in Mold.
18.Leader of injection section for control production plan and man power to support next process(for just in time target).
19.Management Man power and Control overall of Production Line All section. (Injection,MoldM/N,Assembly) follow the target of production plan.
20.Management Meeting member for Report Productivity of Production.
21.Team Leader of 5S and Kaizen Project.
22.Team Leader of New model (FMEA,APQP)
22.Team Leader of New model (FMEA,APQP)
23.Team Leader of Internal Audit for TS-16949
24.Make training Plan and monitoring of the evaluation for training continues to employee.
25.Team Leader for Control Master Plan of PM Injection Machine.
26.Analysis of problems to Los waste in the production line.
27.Emergency Center when have a Problem about Facilities of Factory.(Electric power,Air pump pressure,Emergency
fire alarm)
28.Management Man power and Control of Production Line All section. (Injection , Mold M/N , Assembly) follow the target of production plan.
29.Maintain and preform as the company policy and rule strictly.

ประสบการณ์ทำงานอื่นๆ
1.Have to Training in Japan 1 Year. Course : Injection Mold Plastic and Mold Maintenance.
2.Have to Training in Japan 3 Month. Course : Mold Design.
3.Have to Training in Korea 3 Month. Course : Assembly Process.
3.Training for using Hopper Dryer Model : Nakamura , Kawata , Matsui
4.Training for using Crane Model : Kito 3 ton , Kito 5 ton , Kito 10 ton , Kito 15 , Kito 20 ton , Kito 25 ton.
5.Training couse : Safety
6.Training couse : 5 S Activity
7.Trainingcouse : ISO 9001
8.Training couse : ISO 14001
9.Training couse : TS16949
10.Training couse : MSA
11.Training couse : APQP
12.Training couse : Auto Cad 2D , Auto Cad 3D
13.Training couse : Basic Management
14.Can be hard work and Team Work for Improvement Company
15.Able to work under pressure.
16.I would like to work with Japanese company.
17.Now I'm learning Japanese is more.
18.We are studying a degree in industrial management.