ประวัติการทำงาน

ประสบการณ์ทำงานทั้งหมด 11 ปี

ตุลาคม 2562 ถึง กันยายน 2563

ตำแหน่ง QA/QC ENGINEER (TEAM LEAD)

บริษัท BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED.

ที่อยู่บริษัท Highway 3376, Nikhom Phattana, Nikhom Phatthana District, Rayong 21180

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Ensure the implementation of the Project Quality Plan for the project to ensure quality
compliance.
 Create procedures all concerned as per project specifications.
 Initiate Quality awareness within the project team.
 Review and comment on Client and subcontractors project procedural documents
addressing the control and verification methods which may affect quality conformance
to specification requirements.
 Analyses and advice on quality requirements for the project.
 Ensure all necessary document preparation is completed by all concerned prior to work
execution (as required).
 Oversee QA functions for the Project to ensure efficient control is implemented and
maintained within the Project.
 Prepare and submit the Manufacturers Data Report (MDR) index to the Client for
approval. Review compiles MDRs.
 Report and update the progress status of corrective actions required as identified by
CARs raised also verify CARS completion to the QA/QC Manager.
 Report any Client complaint, in regards to quality, to the Project Manager through
meetings or by e-mail, in order to ensure the appropriate action or improvement is
implemented in an effective manner.
 Expedite project-specific procedural documents and report the submission and approval
status to Project Team.
 Organize with the QA/QC Manager for project quality audit program and compile audit
reports for submission to the Project Manager and Client.
 Ensure Client Specifications and Project Specific Specifications are kept up to date in the
shared drive.
 Ensure Project specific documentation is updated as required in BJC drive location for
The Project.
 Propose to welder improvement when the reject rate over the target.
 Training workmanship to understand a procedure and project specification.
 Witnessing NDE mockup method UT, RT, MT, PT, UTM, HT, PMI, etc. and qualification
operator prior start to works.

เมษายน 2562 ถึง ตุลาคม 2562

ตำแหน่ง QA/QC ENGINEER(Steel Structure)

บริษัท CHINA STATE CONSTRUCTION ENGINEERING (THAILAND) CO. LTD

ที่อยู่บริษัท 2034/77-78 อาคารอิตัลไทย ทาวเวอร์ ชั้น 17 ถนนเพชรบุรีตัดใหม่เขตห้วยขวางบางกะปิกรุงเทพมหานคร

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Review of Inspection & Test Plan/s, Quality Control procedures, Method statement/s,
Welding Procedures, etc.
 Monitoring / Witnessing Subcontractor all the Welding, Fabrication & Erection related
activities approved Inspection & Test Plans/Quality Control procedures.
 Inspection of incoming materials and reviewing test certificate as per code and project
specification.
 Inspection of materials identification as per drawings.
 Witnessing Subcontractor of activities like PQR, Welders qualification Tests, Mechanical
testing, and preparation of PQR records and WQT certificates.
 Inspection before, during, and after fabrication & Erection.
 Review of RT films, Witnessing of UT, MPI, DPI, Hardness, and review of test reports.
 Review of Daily Welding report activities.
 Witnessing of Weld repair activities and approved WPS.
 Line walk and Punch List preparation before work handover.
 Review test packages.
 Witnessing and approved procedures.
 Witnessing and Verification team survey of dimension check level and alignment of
structure activities.
 Verification Mechanical completion Package.
 Issue of Non- conformance reports & verification of Corrective/Preventive action.
 Inspections of Hold and Witness Point.
 Review and closeout MDR.

มีนาคม 2561 ถึง เมษายน 2562

ตำแหน่ง OFFSHORE PROJECT MANAGER.

บริษัท THAI INTERNATIONAL DOCKYARD CO.,LTD

ที่อยู่บริษัท 88/88 Thetsaban Bang Pu 18 Alley, Thai Ban, Mueang Samut Prakan District, Samut Prakan 10280

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
 Oversee and direct construction projects from conception to completion.
 Review the project in-depth to schedule deliverables and estimate costs.
 Oversee all onsite and offsite constructions to monitor compliance with building and
safety regulations.
 Coordinate and direct construction workers and subcontractors.
 Select tools, materials, and equipment and track inventory.
 Meet contractual conditions of performance.
 Review the work progress on a daily basis.
 Prepare internal and external reports pertaining to job status.
 Plan ahead to prevent problems and resolve any emerging ones.
 Negotiate terms of agreements, draft contracts and obtain permits and licenses.
 Analyzers, manage, and mitigate risks.
 Ensure quality construction standards and the use of proper construction techniques.
 Provide advice to the construction manager and site staff on construction strategy and
quality control procedure.
 Instruct and supervise draftsmen in amending scheduler, cost engineer and drawings.
 Study technical specifications and drawings and ensure they are enforced on-site in an
appropriate and sensible Manner.
 Advice on all local standards, authority requirements, and common practice.
 Liaise closely with the client in our office to resolve any issues that arise during design or
construction phases.
 To develop a master project schedule and lead the monitoring roles.
 Conduct interviews with potential contractors and lead the tender/procurement process.
 Other duties as directed, including assisting with the preparation of Tender document in
the office.

ประสบการณ์ทำงานอื่นๆ
SURASAK MECHANICAL & CONSTRUCTION CO., LTD (02 OCT 2017 -16 FEB 2018)
ASSIST. PROJECT MANAGER.
Responsibility:
 Prepare, schedule, coordinate, and monitor the assigned for fabrication.
 Monitor compliance with applicable codes, practices, QA/QC policies, performance
standards, and specifications.
 Interact daily with the clients to interpret their needs and requirements and represent
them in the field.
 Perform overall quality control of the work (budget, schedule, plans, and personnels
performance) and report regularly on project status.
 Assign responsibilities and mentor project team.
 Cooperate and communicate effectively with the project managers and other project
participants to provide assistance and technical support.
 Review engineering deliverables and initiate appropriate corrective actions.
 Review material take-off (MTO).
 Review the bill of material (BOQ).
 Review material receives the report (MRR).
 Review material balance report (MBR).
 Review the material shortage report.
 Purchase order of material and follow-up of materials.
 Procurement status Material Report.
 Follow-up, control &prepare daily, weekly, monthly report, and progress S-curve report.
 Planning &control man-power usage in each project.
 Project / construction control.
 Project / construction coordination.
 Project planning and schedule control.
 Machines and tools planning.
 Fabrication area planning.

EXPERT TEAM CO., LTD (JULY 2012 TO 2017)
OFFSHORE QA/QC INSPECTOR.
Responsibility:
 Reviewed of Inspection & Test Plan/s, Quality Control procedures, Method statement/
Welding Procedures, etc.
 Monitoring / Witnessing all the Welding, Fabrication & Erection related activities as per
client approved Inspection & Test Plans/Quality Control procedures.
 Inspection of incoming materials and reviewing test certificate as per code.
 Inspection of piping materials identification as per isometric drawings.
 Witnessing of activities like PQR, Welders qualification Tests, Mechanical testing and
preparation of PQR records and WQT certificates.
 Stage wise inspection before, during, and after fabrication.
 Review of radiographic films, Witnessing of UT, MPI, DPI, Hardness, PWHT, and review of
test reports.
 Review of Daily Welding reports & Welding Pipe and Structural.
 Witnessing of Weld repair activities as per client approved WPS.
 Line walk and Punch List preparation before Hydro Test.
 Review of Hydro test packages.
 Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
 Verification of Reinstatement of Piping systems after completion of all hydro-testing
activities.
 Verification Mechanical completion Package.
 Issue of Non- conformance reports & verification of Corrective/Preventive action.
 Liaison with client inspectors for inspections of Hold and Witness Point.
 Witnessing / Inspection of Tie-In and Hot Tap welding activities.
 Witnessing shut down Inspection of a vessel, Heat exchanger & Piping Hot tap.
 Final and closeout MDR.

POWER METAL (BANGKOK) CO.,LTD (JULY 2010 - TO MAY 2011)
Engineer
Responsibility:
 Manage, supervise the work of the project.
 Plan, monitor, and monitor projects effectively. And to complete the plan laid out.
 Coordinate with customers and maintain a good relationship between the company and
the customer.
 Planning and budgeting of the project effectively.
 Update the progress and status of the project to the manager.